Shopping Cart

close

Es befinden sich keine Produkte im Warenkorb.

Return to shop

Shopping Cart

close

Es befinden sich keine Produkte im Warenkorb.

Return to shop

Blowing And Sucking Dual Purpose Gun Blowing Gun Pneumatic Tool Pneumatic Blower Cloth Bag

$112.00

To change the direction of blowing, simply remove the No. 5 part and turn the No. 3 part to the direction.

Pneumatic tool use and maintenance

Pneumatic tools „Maintenance Code“

In order to keep your pneumatic tools in good working condition for a long time, please maintain and protect the tools as follows.

Use appropriate pressure air

Use a gas with a pressure in the range of 6.0-8.0KG/CM2 or the pressure required in the instruction manual. If the air pressure is too low, the tool's working efficiency will be significantly reduced or even not working properly. If the air pressure is too high, it can improve the working efficiency of the tool, but it is easy to damage the internal parts and shorten the life of the tool.

Use filter

Foreign matter such as moisture, dust, and rust in compressed air is the main cause of premature aging of pneumatic tool parts. Therefore, it is necessary to install a filter. Filter foreign matter in the air to provide clean and dry gas to the tool. The filter should have sufficient flow and should be cleaned frequently, otherwise it will not work properly due to insufficient flow. In addition, after the air compressor is operated for a period of time, a large amount of water is accumulated inside, and it must be periodically discharged to ensure that the gas is dried.

Lubrication in Dayong County

All pneumatic tools must be properly lubricated at regular intervals to ensure normal long-term work. The correct lubrication method is achieved by a “three-point set” unit (water tank). When the airflow passes through the water level, the oil in the oil can is atomized, and the choice of the oil is also important. The use of incorrect oil can cause damage to the tool, generally using a special lubricant for pneumatic tools or SAE #10 lubricant. Condensed oil is strictly prohibited. If there is no water oil grid device for the time being, then 3-4 drops of lubricating oil will be dripped into the air inlet of the tool before and after the work, or the screw hole will be screwed out in the pre-designed oil filling hole, and the oil will be tightened after the oil is injected. The work with the beating drive (air gun, wind wrench, etc.) should be checked regularly for the beating part every month.

Artikelnummer: 32976435522 Kategorie:
Brand Name

ZEMLIA

Motor Type

Carbon Brush Motor

Origin

CN(Origin)

Item Length

13cm

Include Accessories

Yes

Item Type

Car Washer

Item Weight

5kg

Item Width

20cm

Model Name

632

External Testing Certification

ce

Item Height

23cm

Bewertungen

Es gibt noch keine Bewertungen.

Schreibe die erste Bewertung für „Blowing And Sucking Dual Purpose Gun Blowing Gun Pneumatic Tool Pneumatic Blower Cloth Bag“

Deine E-Mail-Adresse wird nicht veröffentlicht.